IR REMOTE CONTROLLER INDICATION
How to use the DIY function on the remote controller?
When the DIY button is pressed for the first time, the control will enter DIY color
mode. You can create a own color for every single DIY key. Pressing the DIY key
again will make you leave the DIY color mode. The strip automatically saves the
color that you created. The next time this key is pressed, it will show the color
you saved the last time.
There are 6 DIY keys so you can save up to 6 colors. All modes are independent and
have no effect on each other. For example: If you press DIY key 1 first and DIY key
2 afterwards, DIY key 1 will be invalid, until key 2 is pressed once again.
44 KEY Remote
1. LED brightnesss adjustment UP
2. LED brightness adjustment down
3. Pause/continue
4. ON/OFF
5. LED color buttons (20 colors)
Red/green/blue/white/orange/light green/
dark blue/milk white/dark yellow/cyan
/lyons blue/white pink/yellow/light blue
/purple/green white/light yellow/sky blue
/ brown/blue white
6. Quick button: speed up color changing
under jump3, jump7, fade7 and flash modes
7. Slow button: speed up color changing
under jump3, jump7, fade7 and flash modes
8. Auto button: speed up color changing
under jump3, jump7, fade7 and flash modes
9. Flash button: Flash on and off
10. Fade 7 button: Gradually fade 7 colors
11. Fade 3 button: Gradually fade 3 colors
12. Jump 7 button: Gradually jump 7 colors
13. Jump 3 button: Gradually jump 3 colors
14. DIY buttons: 6 DIY color memory buttons
15. Adjust buttons: Increase/decrease RGB
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15