StressVest SV-ARM Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 16

StressVest SV-ARM Скачать руководство пользователя страница 13

5.9 Using With The StressVest®

Once armed, the StressVest® Arm Shocker will be activated when the StressVest panel is hit with an IR laser.
The StressVest® Arm Shocker can be disarmed and shocking will stop by pressing either the Power Button
(2) on the StressVest® Arm Shocker or the left or right buttons on the wireless Key Fob (8).

5.10 Changing The Batteries

The StressVest® Arm Shocker is powered with four AA batteries. New batteries will last for at least 8 hours of
training and deliver over 100 shocks. When the StressVest® Arm Shocker Battery is low the Status Light (3)
will ]lash red.

1. Remove the Sensors (4) attached to the velcro on the arm

band.

 

2. Open the velcro ]lap on the Battery Compartment (6).

 

3. Slide out the battery pack to access the four AA batteries.

 

4. Replace with four new AA batteries, slide the battery pack

into the pouch and close the velcro ]lap.

 

5. Place the Sensors (4) back on the velcro pads as shown in

the picture.

NOTE:

It is important the the Sensors (4) are place correctly to receive proper hits from iR lasers.

 

 
 

13

Battery Pack

«
...
11
12
13
14
15
...
»

Содержание SV-ARM

















Отзывы:

Нет отзывов