Strend Pro SC-3601, Инструкция по эксплуатации

Страница: 55 / 56

3. New batteries or unused batteries for a long time will reach the maximum capacity after 5 times of charge-
discharge cycles.
4. Don't charge batteries repeatedly after several minutes of operation and this may reduce working time
and efficacy of batteries.
5. Don't use damaged batteries or don't disassemble the charger or batteries.
6. Do not throw the battery in a fire. Danger of explosion!
7. Don't charge batteries in outdoor or humid environment.
8. With the gradual deduction of battery electric quantity, it is normal to reduce the ability of shearing
diameter.
9. As charging process, don't use electric pruning shears.
BLADE POLISHING
1. Black out as opening the blade; for security, please disconnect power connecting line on batteries.
2. Both sides of the moving blade are polished by using oilstone by forming the section angle with the blade.
3. After polishing the blade, clean it, connect to the power line, test by energizing, close the blade and finish
it.
BLADE REPLACEMENT
1. For security, please black out before replacement and disconnect the power connecting line on
batteries.
2. Operate as the diagram step by step and replace the blade.
3. After replacing the blade, clean it, connect to the power line, test by energizing, close the blade and
finish it.
1. Turn off the battery switch
and pull out the power line. 2. Disassemble enclosure
screws 3. Disassemble screws of the blade
and fixed button( this step is critical
)
4. Disassemble screws of the
blade 5. Disassemble dowel 6. Finish disassembling the upper
blade