and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or
energising power tools that have the switch on invites accidents.
- Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to
a rotating part of the power tool may result in personal injury.
- Do not overreach. Keep proper footing and balance at all times. This enables better control of the power
tool in unexpected situations.
- Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from
moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
- If devices are provided for the connection of dust extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection can reduce dust-related hazards.
4) POWER TOOL USE AND CARE:
- Do not force the power tool. Use the correct power tool for your application. The correct power tool will
do the job better and safer at the rate for which it was designed.
- Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must be repaired.
- Disconnect the plug from the power source and/or the battery pack from the power tool before making
any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the
risk of starting the power tool accidentally.
- Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained
users.
- Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any
other condition that may affect the power tool’s operation. If damaged, have the power tool repaired
before use. Many accidents
are caused by poorly maintained power tools.
- Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.
- Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account
the working conditions and the work to be performed. Use of the power tool for operations different from
those intended could result in a hazardous situation.
5) SERVIS:
- Have your power tool serviced by a qualified repair person using only identical replacement parts. This will
ensure that the safety of the power tools is maintained.
OPERATION
UNPACKING
- Unpack the product carefully and be careful not to throw away any part of the packaging material until you
have found all the parts of the product.
BEFORE PUTTING INTO OPERATION
- Read the following safety instructions and operating instructions before working with the garden pump.
Familiarize yourself with all parts and proper use of the device. Failure to follow the warnings and instructions
may result in electric shock, fire, and / or serious injury. Keep these instructions in a safe place for future
reference. If you pass the device on to other people, pass it on together with the instructions.
- The product is not intended for use by persons (including children) whose physical, sensory or mental
disability or lack of experience and knowledge prevents its safe use, unless they have been supervised or
instructed in the use of the appliance by a person responsible for their safety. Take care of the children to
ensure that they cannot play with the product.
- Children older than 3 years and younger than 8 years of age can only switch the appliance on and off
provided that it is placed and installed in its normal operating position, if children are supervised or instructed
Содержание MJP1000
Страница 39: ...3 24 3 3 24 3 ...
