EN
Choose your desired accessory (brush or nozzle) and attach it to the suction hole.
USE:
Power ON / OFF
Power the vacuum cleaner on by turning the switch to position "I".
Power the vacuum cleaner off by turning the switch to position "O".
"SYNCHRO" mode
Connect power tools (max. 2000 W) to the built-in power outlet.
Set the switch to position "II".
- After power on the connected power tools the vacuum cleaner automatically switches on.
- When the power tool is switched off, the vacuum cleaner is switched off with a small delay.
Dry vacuuming
Install the HEPA filter on the filter basket.
Put the paper filter bag in the collection container
carefully.
Attach the top of the vacuum cleaner to the collection
container and secure it with the hook.
Unwind the power cord.
To use the flexible hose, insert the end of the hose into
the suction hole. Make sure, that it is snapped in the
position.
CAUTION:
Before you start the appliance, make sure
that the hose assembly is in the position. or else the
appliance had mangled.