EN
GENERAL SAFETY INSTRUCTIONS
- WARNING!
Make sure that you read the safety instructions, labels and technical data provided with this
electric tool.
Failure to do this may result in the risk of electric shock, fire and/or serious injury.
1) OPERATIONAL SAFETY:
- The workplace shall be clean and properly illuminated. Accidents are likely to happen in dark and messy places.
- Do not use the electric tool in areas with the risk of explosion or the presence of flammable liquids, gases or
dust. The electric device might generate sparks that could ignite the dust or fumes.
- When using the electric tool, keep the children and other people out of the area. If you will be disturbed, you
might lose control over the device.
2) ELECTRICAL SAFETY
- Pins of the electric plug shall be compatible with the socket. Never modify the electric cable by any means. If
the plug of the tool has the earth pin, never connect it through a two-way adaptor or other adaptors.
Undamaged plugs and sockets lower the risk of electric shock. Damaged or tangled cables increase the risk of
electric shock. If the cable is damaged, it shall be replaced with similar cable that can be obtained from the
manufacturer or their sales representative.
- Body of the operator shall not touch grounded objects like pipeline, central heating device, cookers or fridges.
If your body is connected to the ground, the risk of electric shock is higher.
- Keep the electric tool away from rain, humidity or water. Never touch the electric tool with wet hands. Never
wash the electric tool in running tap water and never dip it into water.
- The cable shall not be overstretched. Never unplug the electric tool by pulling out the cable. Keep the cable
