- Connect the black wire to the negative terminal of the car battery (-) and the red wire to the positive
terminal of the car battery (+).
- Turn the power switch to the ON position.
- The power indicator will turn red and the LEDs will flash for 3 seconds. The ultrasonic signal will be
transmitted from the speakers.
- After detecting engine vibrations (vehicle start), the device stops working. 90 seconds after the vibration
is stopped (vehicle stops), the device automatically starts operating.
Note:
If the vehicle is not going to be used for a long time, turn off and unplug the device.
MAINTENANCE
- Use a soft cloth to clean, if necessary moisten the cloth in soapy water. Never use cleaning agents or solvents
such as benzine, alcohol, ammonia, etc.! These solvents can damage the plastic parts of the product.
- Do not allow water to enter the unit.
- Protect the device from dust, dirt and shock.
