2.
Dashboard Adhesive Mount
To mount the gadget to your
dashboard, remove the adhesive
protection film from the supplied
pad (Fig 4) and position it on to
the suction pad of the phone
holder.
Position the holder as required
on the dash board (Fig 5). To
secure in place, screw the phone
holder to the dash using the
three screw holes (screws NOT
supplied).
Then place your phone into the
adjustable grip and adjust as
required.
3.
Vent-Mount Clip
:
Please
note, the phone holder will not
rotate when using the vent-clip.
You will need to remove the
suction cup mount from the
phone holder. Hold the device
as
per Fig
ure
6 and position your
thumbs behind the adjustable
arm of the holder.
P
ush your
thumbs forward until you hear
a click, the suction cup can
now be removed.
Fig 4
Fig
4
Fig
5
