5
Wet Vacuuming
Important: The wet vacuum functionality should only be used for absorbing water-based liquids. It is
perfect for cleaning wet floors and aquariums. It should NEVER be used for absorbing oil, solvents,
alcohol or other non-water-based liquids.
To use the wet vacuum function, follow the instructions below:
1. Loosen the buckles and remove the head cover.
2. Remove the cloth filter and empty out the barrel of any waste collected.
3. Place the sponge filter as shown in Figure 4.
4. Place the head cover with a sponge filter now in place back on to the vacuum
and secure in place using the barrel buckles.
5. Before wet vacuuming, ensure the vacuum is connected to a mains power supply.
6. To start wet vacuuming, switch on the vacuum via the power switch.
Blower Functionality
The blower functionality is ideal for funnelling dirt, dust and even leaves.
To use the blower functionality, simply take out the hose from the
suction inlet and place it into the blower outlet as shown in figure 5.
Once the hose is securely attached to the blower outlet, connect
the unit to your mains power and turn the vacuum on via the power
switch to start blowing.
Dust Shaking
This feature is designed to loosen dust that is built up inside the barrel
that happens after frequent dry vacuuming. This can lead to abnormal
vacuum suction.
1. First ensure your vacuum is connected to your mains power.
2. Then, block the suction inlet using a card or something similar
(see Figure 6) then switch on the vacuum via the power switch.
3. When the vacuum is switched on and you are blocking the suction
inlet, press the dust shaking button for 1 second then release.
Repeat this process 10 times.
4. Once done, turn off the vacuum, open the head cover via the barrel buckles and empty out the barrel.
Attachment
Suitable For
Floor Brush
For vacuuming carpet floors (dry) and wet floors (wet)
Small Attachment
For cleaning vehicle interior, stairs and furniture.
Fig. 4
Fig. 5
Fig. 6
