Technical Specification
Product Name
Supplier Code
Input Voltage
Musical Air Horn
Dixie Melody: BH1
La Cucaracha: BH2
12V
4. Connect the relay terminals 30/86 to the positive terminal of your vehicle’s 12V battery.
When doing so, we recommend you also connect a 20Amp fuse as shown in Figure 4.
5. Once installed, test the horn to ensure proper operation.
6. Then mount the relay inside your vehicle’s bonnet by drilling a 1/8-inch hole and securing in
place using the provided screws.
Recap of Relay Connections
• Terminals 30/86:
the two terminals are connected to the positive terminal 12V battery.
• Terminal 85:
connect to the negative terminal of the horn switch.
• Terminal 87:
connect to the positive terminal of the compressor.
Maintenance
To maintain the air horn’s performance, the compressor unit should be lubricated every 4 to 6
months using either 10W, WD-40 or air tool oil. To lubricate the compressor, please follow the
instructions below:
1. Unbolt and unmount the compressor unit.
2. Pour 4 to 6 drops of oil into the opening of the bolt’s housing.
Please note: If you are unable to dismount/unbolt the compressor, you can remove one of the air
tubes and pour 4 to 6 drops into the outlet.
Health & Safety Guidelines
1. Please ensure you have sufficient knowledge and expertise to install this product. If you do
not, please seek assistance from a competent professional.
2. Never install this product when the vehicle is either switched on or the engine is running.
Electrical hazard.
3. This product is not a toy, please keep away from children. The plastic air tubes are a
suffocation risk and the fixings and coiled should not be swallowed.
Technical Support
If you require any technical support, please contact us on:
and provide product name and supplier code (see Technical Specifications) along with the
technical query and proof of purchase.
