Product Elements
• 5 x horn trumpets
• Compressor
• Plastic air tubing
• Relay
• Fixings and bolts
• Coil Clips
Mounting Instructions
1. Carefully remove all the components from its
packaging.
2. Find a suitable location for installing the
compressor in your vehicle’s bonnet. Ensure that
the compressor is not too far from your vehicle’s
battery, but it is also a safe distance away from
the heat emitted from the engine. To secure the
compressor, drill a 3/16-inch hole through the
metal work and mount the compressor vertically as
shown in Figure 1.
3. Next position each trumpet inside your bonnet. For
mounting each trumpet, you will need to drill a 1/4-
inch hole. When mounting each trumpet, ensure
you position each trumpet with the open end facing
downwards as this will prevent water getting inside.
Use mounting hardware reference shown in Figure
2 for when mounting the trumpet.
4. Once both the trumpets and the compressor are
mounted into position, get the plastic air tubing and
cut it into appropriately length pieces, and install
the air tube as shown below in Figure 3. Secure the
air tubes in place on both ends using the provided
coiled clips.
Important: When installing the air tubing, avoid
making any kinks or sharp bends that would
restrict airflow or affect the horn’s sound.
Fig 1
Fig 2
Fig 3
