StreetStrider 3i Скачать руководство пользователя страница 17

 

 3i and 7i Owner’s Manual     17 

 

 7. 

 

Limited Warranty                                                                       

      

.

 

  

The specific warranty covering your 

StreetStrider

 is governed by the law of the state or country in which it was purchased, and applies only to 

mobile elliptical devices purchased from a 

StreetStrider

 Authorized Dealer.  

  

Frames (Frame, Strider Skis, Strider Poles).

  StreetStrider

 frames are warranted by 

StreetStrider

, 16321 Gothard St, Unit E, Huntington Beach 

CA 92647, against manufacturing defects in materials and/or workmanship for a period of three (3) years from the date of original purchase. 

 

  

Components.  

Components are warranted by their original manufacturer and not by 

StreetStrider

.

 

The Shimano internal geared hub is warranted 

for a period of two (2) years according to the Shimano warranty (

http://bike.shimano.com/content/sac-bike/en/home/news-and-info/warranty.html

). 

Joint bearings, drive parts, and frame fixtures are warranted against manufacturing defects in materials and/or workmanship for a period of one (1) 

year and according to the individual components’ manufacturers, from the date of the original retail purchase.  

 

Terms of Limited Warranty. 

This limited warranty is not meant to suggest or imply that the 

StreetStrider

 cannot be broken or will last forever. It 

does mean that the 

StreetStrider

 is covered subject to the terms of the limited warranty.  

 

This limited warranty applies only to the original owner of a 

StreetStrider

 and is not transferable to subsequent owners.  

 

This limited warranty applies only to 

StreetStriders

 assembled in full compliance with the instructions within this Owner’s Manual.   

 

Damage resulting from normal wear and tear, including the results of fatigue, is not covered. Fatigue damage is a symptom of the frame 

being  worn  out  through  normal  use.  It  is  one  kind  of  normal  wear  and  tear,  and  it  is  the  owner’s  responsibility  to  inspect  his/her 

StreetStrider

 on a regular basis.  

 

This  limited  warranty  is  void  if  the 

StreetStrider

  is  subjected  to  abuse,  neglect,  improper  repair,  improper  maintenance,  alteration, 

modification, an accident or other abnormal, excessive, or improper use – to be determined by the Company at its sole discretion.  

 

Personal injury, 

StreetStrider

 failure, loss or damage, abuse, neglect, normal wear and tear including the results of fatigue, improper fit or 

maintenance by anyone other than a 

StreetStrider

 Authorized Dealer, or use of parts inconsistent with the use originally intended for the 

StreetStrider

 as sold are not covered by this warranty. In no event shall the Company be liable for incidental or consequential damages 

that might arise as a result of improper use and/or failure of the 

StreetStrider

.  

 

For any warranty claim to be considered, the 

StreetStrider

 must be brought in to a 

StreetStrider

 Authorized Dealer on the same continent 

on which the 

StreetStrider

 was purchased. The 

StreetStrider

 must be in assembled condition and accompanied by the original, dated 

sales receipt for the 

StreetStrider

. Be sure to keep your receipt in a safe place. 

 

All labor and transportation charges for warranty service are the responsibility of the 

StreetStrider’s

 owner. 

 

During  the  duration  of  this  Limited  Warranty,  the  Company  will  either  repair  any  defective  frame  or  component,  or,  at  our  option,  replace  any 

defective frame or component with the same or most nearly comparable model or component then available.  

 

THIS IS THE EXCLUSIVE REMEDY UNDER THIS WARRANTY. ANY AND ALL OTHER REMEDIES AND DAMAGES THAT MAY OTHERWISE 

BE  APPLICABLE  ARE  EXCLUDED,  INCLUDING,  BUT  NOT  LIMITED  TO,  INCIDENTAL  OR  CONSEQUENTIAL  DAMAGES  OR  PUNITIVE 

DAMAGES. 

 

THIS IS THE ONLY WARRANTY MADE BY 

STREETSTRIDER

 ON ITS FRAMES AND COMPONENTS, AND THERE ARE NO WARRANTIES 

THAT EXTEND BEYOND THE DESCRIPTION HEREIN. ANY WARRANTIES THAT MAY OTHERWISE BE IMPLIED BY LAW INCLUDING, BUT 

NOT  LIMITED  TO,  ANY  IMPLIED  WARRANTY  OF  MERCHANTABILITY  OR  FITNESS  FOR  A  PARTICULAR  PURPOSE,  ARE  EXCLUDED. 

Please refer to the documents included with your 

StreetStrider

 for possible further restrictions.  

 

NOTICE

:  StreetStriding  is  potentially  a  hazardous  activity,  as  is  bicycling.

  The  user  understands  that 

StreetStriding

,  even  under  normal 

circumstances, can be hazardous, and accepts full liability for any injury, accident, or death of the user or other 

StreetStrider

 occupant that may 

arise from the use of the 

StreetStrider

. The user assumes the risk of any personal injury, damage to or failure of the 

StreetStrider

 and any other 

losses  if  the  StreetStrider  is  used  in  any  competitive  event,  including  racing,  ramp  jumping,  stunt  riding  or  similar  activities  or  training  for  such 

competitive activities or events. This 

StreetStrider

 is not manufactured, marketed, designed or intended to be altered in any way or at any time for 

use in the following ways: stunt riding, curb jumping, hopping, or similar activities, in off-road conditions, or with motors, engines or other power 

equipment. Use of a 

StreetStrider

 in any of these or similar ways automatically voids the 

StreetStrider

 Limited Warranty. The Company, its dealers, 

affiliates or agents shall not be liable under this warranty nor under any state or federal law or the common law or otherwise for any damage, failure, 

including personal injury, resulting from such use and/or alteration.  

 

This Limited Warranty gives the consumer specific legal rights. The consumer may also have other legal rights that vary from state to state or 

country to country. Some states and countries do not allow the exclusion or limitation of incidental or consequential damages or warranties, so the 

above limitations or exclusions may not apply to you. If it is determined by a court of competent jurisdiction that a certain provision of this Limited 

Warranty does not apply, such determination shall not affect any other provision of this Limited Warranty and all other provisions shall remain in 

effect. 

 

NOTICE

: The policy of the Company is one of continued development and improvement. Consequently, we reserve the right to change or 

amend or discontinue specifications in this publication without prior notice. 

Содержание 3i



















Отзывы: