SAFEZONE Solar Motion
LED Light
Model: SWSZSL20
Function
1.
To turn it on press the on/off button using the end of a paperclip
or other small (pointed) tool.
2.
Pressing the on/off button again will turn the Solar Light off.
3.
When it gets dark, the light automatically turns on in dim light
mode. When motion is detected, the Solar Light will illuminate the
area. The light becomes dim again after 10 seconds.
4.
The solar panels are charged in direct sunlight. The electrical
energy is stored in the battery. The more direct sunlight, the
better the charge for the battery.
NOTES
1.
Place the product under direct sunlight and charge for 8 hours
PRIOR
to installation.
2.
If you plan not to use the Solar Light for an extended period of time, turn off the light and put in a
dry place for storage. Failure to re-charge the battery, once every 3 months, will damage the battery
and void the warranty.
3.
If the lights begin to flash, the battery needs to be fully recharged. Place in direct sunlight for 8
hours.
4.
The efficiency of solar panels depends on the direct sunlight exposure hours and weather conditions.
The stronger the direct sunlight, the quicker the recharge time. Charging on rainy days will increase
the charging time and affect the brightness of the light.
Insert end of paper clip or tool here
