Strech Plastics RX-6-26, Руководство по установке

Страница: 7 / 12

STEP 6:
Remove the seat back
support mounts and
plastic support covers.
Save the bolts for
installation.
6
STEP 7:
Remove the rear bum-
per and save the side
bolts for use during
installation.
Assembly
STEP 1:
Place the step frame on a table with the
mounting tabs facing up. Place the plastic step
assembly on top of the frame then while hold-
ing on to both pieces flip the assembly over.
Using eight 1/4” x 1-1/4” bolts and eight 1/4”
x 1” fender washers secure the plastic foot rest
to the step assembly.