background image

5

Malfunctions and Troubleshooting

Malfunctions and Troubleshooting

Maintenance

During the usage of the 

HIGHLINE™

 high pressure system, there may be some small  

troubleshooting to undertake:

Care and maintenance of your 

HIGHLINE™

 high pressure system will ensure it is well looked after 

and running smoothly every time. 

It is recommended to run an inspection  quarterly examination before each use, 3 month  

and 12 months.

i.  Fluctuating pressure at the lance 

ii.  Pump running normally but pressure is low

vi.  Oil dripping from pump/gearbox/engine

vii. Excessive vibration in lance/delivery line

iii.  Pump active but very noisy 

iv.  Presence of oil in the water

v.  Water dripping from under the pump 

a. 

Blocked inlet water filter or poor water supply – check, clean or replace  

 

if needed

b. 

Pump sucking in air – ensure all seals are firm, check integrity of suction  

 

hose and connections

a. 

Pressure regulator valve needs adjustment 

b. 

Pump sucking in air – ensure all seals are firm, check integrity of suction  

 

hose and connections

c. 

Lance in low pressure mode – check and adjust

d. 

Nozzle is badly worn – check and replace

a. 

Worn oil seals – contact service centre

a. 

Water supply low – check adequacy of water supply. Ensure suction filter  

 

is below water level.

b. 

Ingress of air into suction line – check integrity of suction hose  

 

and connections

c. 

Contact service centre 

a. 

Pump sucking in air – ensure all seals are firm, check integrity of suction    

 

hose and connections

b. 

Excessive temperature of liquid in pump – reduce temp to below 60 degrees

c. 

Worn bearing or valves – contact service centre

a. 

Worn out oil seals – contact service centre

a. 

Worn piston seals – contact service centre

6

Maintenance

Before Each Use

12 month inspections

• 

Inspect / top up oil levels in pump, gearbox, engine

• 

Clean brass weight water inlet filter

• 

Inspect high pressure hose and its connection for tightness and damage

• 

Inspect suction hose and its connection for tightness and damage

• 

High pressure jet must be inspects and changed if damaged

• 

Overall system if there is any physical damage 

• 

Change the oil in Gearbox, Engine and high pressure pump

• 

Inspect Gearbox and replace if damaged 

• 

Change high pressure jet

• 

Change air filter 

HIGHLINE

16

W: www.streamline.systems   E: [email protected]   T: +44 (0)1626 830 830

W: www.streamline.systems   E: [email protected]   T: +44 (0)1626 830 830

17

Содержание HIGHLINE HP-T12150PHR














Отзывы: