Turning your HIGHLINE™ high pressure washing system ON
Operating your HIGHLINE™ high pressure washing system
i.
START your engine (refer to
accompanying engine booklet
relating to the type/style of
engine fitted.)
i.
Release the lance safety catch which is
located behind the trigger.
iii.
Squeeze the trigger to start the high
pressure jet. You can adjust the working
pressure by turning the pressure
reg or – to suit your application.
ii.
Point the lance towards the object
being cleaned
iv.
Release the trigger to stop the high
pressure jet.
The
HIGHLINE™
high pressure washer system is designed for a single operator use.
The water supply can sometimes be interrupted for short lengths of time i.e. when the operator
moves from locations. However if the
HIGHLINE™
system is interrupted for long periods of time, it
is best to switch off the pump to save overheating and/or over pressurising, and potentially
damaging the system.
Important
Always ensure you have a firm footing and be ready for the ‘Kick Back’ when pulling the
trigger on the lance.
HIGHLINE
™
12
W: www.streamline.systems E: [email protected] T: +44 (0)1626 830 830
W: www.streamline.systems E: [email protected] T: +44 (0)1626 830 830
13
