background image

4

Technical and Service - Ph: 1300 735 352  |  Email: [email protected]

11

Seat Install: Insert fixing bolts into holes in the pan. 

12

Push the plastic and metal washers as far down the screw as 

possible, then finger tighten.

13

14

Once you have positioned the seat in the desired position, open 

the lid and with an 

8mm spanner,

 tighten the posts until the seat 

is locked in place.

Push seat onto the posts and close lid. Move the seat around 

until it is square with the pan. 

Please leave the instructions with the owner.

Содержание ARCISAN Synergii SY04117

Страница 1: ...or bottom inlet the installer will also need to supply the flexible hose for connection between the inlet and the stop tap A 500mm length flexible hose will suit most installations but the required length is dependent on the position of the stop tap 1 Back Inlet 80 200 185 210 75 735 Optional elbow for set out 160 220mm JT34 Dimensions are in millimeters and are subject to manufacturing variations...

Страница 2: ... attach brackets 3 For S Trap installation cut horizontal pipe to required length and fit seal Attach wall fixing kit to elbow push elbow into the pan collar and adjust to correct height Fix to wall and adjust to ensure the elbow is vertical 4 Attach pan bolts into holes as shown 6 Locate the pan in the final position Screw threads into floor mount brackets 55 7 Fit outlet seal to bottom of outlet...

Страница 3: ...l or anticlockwise for lower float water level Screw inlet hose onto stop tap Place inlet valve into position within the cistern 9 Back Inlet 8 Connect flexible hose not supplied to inlet pipe at bottom of cistern 10 Join the inlet mechanism hose to the thread and replace inlet mechanism Connect flexible hose to stop tap Bottom Inlet 9 Feed hose through hole in pan and locate the cistern onto the ...

Страница 4: ...nd metal washers as far down the screw as possible then finger tighten 13 14 Once you have positioned the seat in the desired position open the lid and with an 8mm spanner tighten the posts until the seat is locked in place Push seat onto the posts and close lid Move the seat around until it is square with the pan Please leave the instructions with the owner ...

Отзывы: