Streamit Lisa Compact, Руководство пользователя

Страница: 14 / 109

Lisa Compact 14
3 First time setup
The Lisa Compact comes with default settings. The most important are the network settings. By default
DHCP is used.
This section describes the first time start up and the device activation.
3.1 Switching on the Lisa for the first time
The first time the Lisa Compact is powered on, it will apply default settings for the most important
settings, using DHCP for IP settings. When IP configuration via DHCP succeeds, the network status
LED will burn green constantly.
1. In case DHCP is not supported in the specific network or a proxy is employed, you must use the
Lisa Configuration Tool to configure the correct IP and proxy settings. Only then the Lisa will able to
connect to the configuration platform, software update server and activation server.
2. Once IP settings are configured, the device will try to connect to the default configuration platform
(Streamit Device portal). Shortly after that, it will look whether a new version of the software is
available and update if required.
3. Register and assign the correct configurations for this device in the chosen configuration platform.
The default configuration platform is the Streamit Device portal. When a different configuration
platform must be used, please use LCT to configure the correct platform location.
4. Every minute the Lisa Compact will try to get new configurations from the configuration platform, until
it receives a configuration with one or more presets. If you do not want to wait, a configuration
update or reboot can be issued from any of the available command interfaces. It is also an option to
unplug the power cable and plug it back again.
During startup, the device activation is executed. The Lisa device will receive code from the activation
server, enabling the capabilities on the device that correspond to the purchased edition. For more
information, please see
Device activation .
3.2 Device activation
All Lisa devices are shipped with Basic edition capabilities. The Basic edition only supports streaming of
content in MP3 format. If you have purchased a device of a different edition, this will only be enabled
after the device has been activated.
Activation is done during startup. During activation, the Lisa device receives code from the activation
server, enabling the capabilities on the device that correspond to the purchased edition (e.g. Ultimate).
Please note that it is not possible to upgrade/downgrade to a different edition after the purchase is
made.
The activation process is automatic and transparent to the user. During startup, a non-activated Lisa
device will connect to the activation server. For this to succeed, internet connectivity is required, the
device needs to be connected properly and correct network settings have to be programmed.
If activation fails or fails partly, the Lisa will try again, until it has completed the activation process, which
is confirmed by activation server.