Streamax AD Plus2.0, Руководство пользователя

Страница: 25 / 32

AD Plus2.0 User Manual
Page 24 of 66
device).
2. Ignition Delay : allows you to set the time for the delayed shutdown after the
car key is turned off, which can be set from 0 to 86399 seconds, and the default
is 300 seconds.
3. Video Recording Delay : allows you to set the time for the video recording
after the car key is turned off. The configurable time range changes with the
ignition delay. The maximum time for video recording delay is subject to the
ignition delay. Specifically, the video recording delay is equal to or less than
the configured ignition delay.
4. Scheduled Power-on Time: allows you to select the time range for powering on
the device. Currentl, the scheduled power-on and power-off are not available.
5. Backlight turn-off time: when an external display is connected, the screen
backlight turn-off time can be configured, including never, 30s, 1 min, 3 mins,
5 mins, and 10 mins.

Sleep
Tap Preferences > Basic Setup > Time Setup > Sleep , as shown in the following
figure:
1. Sleep Mode: can be set to Low power standby or Zero power standby.

Zero power standby
: In this sleep mode, the system will not be waken
up after the device is turned off in ignition or timing mode.

Low power standby : In this sleep mode, the system can be waken up by
the IO alarm, phone call, or SMS and start the MDVR after the device is
turned off in ignition or timing mode.
2. Sleep Time : allows you to set the sleep time to 0–100 hours. The default is
100 hours.
3.
Low power protect
: enables low voltage protection after being selected.
4. Battery low voltage protect: enables the system to enter the sleep status when
the car key is turned on and to enter the power-off status when the car key is
turned off, thus protecting the battery power of the vehicle when the battery
voltage is lower than the set value.
5. Voltage Startup : restarts the system when the battery voltage is higher than