Theme 22 Issue 2.1 09/07/01
Page 11 of 12
Replacement of ignition &
pilot assembly
1. Repeat operations 1 - 7, as described for 'Replacement of gas tap/FSD/piezo igniter'.
2. Disconnect
thermocouple
connection to the gas tap/FSD/piezo igniter.
3. Disconnect pipe from base of pilot burner tube.
4. Pull off connector on the base of the igniter probe.
5. Remove 2 screws on gas burner and remove ignition unit complete.
6. Fit new pilot assembly and reassemble in reverse order.
7. Turn on the gas supply and check for soundness.
8. Check operation of ignition system.
Fig. 14 Theme 22 outline drawing without trim
SPARE PARTS
When ordering spare parts please quote part numbers as listed below:
NATURAL GAS
L.P.G. (Propane)
Gas tap / FSD / piezo igniter
BV50023
BV50147
Oxypilot assembly
BA50004
BA50041
Injector
BI70800
BI70620
3 - Back ceramics (left, right, centre)
BC11610
BC11610
2 - Centre ceramics (left & right)
BC11394
BC11394
3 - Front ceramics (left, right, centre)
BC11520
BC11520
Set of 21 coals
BC50084
BC50084
495mm Lo
w
line Version
534mm Lo
w
line Version
