Strautmann Giga-Vitesse CFS 3602, Руководство по эксплуатации

Страница: 62 / 327

Safety instructions
Giga-Vitesse CFS 3602 - 4402, Giga-Vitesse CFS 3602 DO - 4402 DO 03.18 62
3.3.4 Structural alterations
Alterations, extensions and modifications on the machine shall only be allowed upon approval by B.
Strautmann & Söhne GmbH u. Co.KG. This shall also apply to welding work on load-bearing parts.
All extension or modification measures require a written consent of B. Strautmann & Söhne GmbH u.
Co. KG. Only use modification and accessory parts approved by B. Strautmann & Söhne GmbH u. Co.
KG, in order to ensure e.g. that the validity of the operating license according to national and
international regulations is not affected.
Vehicles provided with an official operating license or vehicle-linked devices and equipment provided
with an official operating license or a road traffic license according to the road traffic regulations must
be in the condition specified by that license.
WARNING Risk due to breaking of load-bearing parts!
As a basic principle, the following is not allowed:
•
Drilling at the frame or chassis,
•
boring up of existing holes at the frame or chassis,
•
welding on load-bearing parts.
3.3.5 Spare and wearing parts, auxiliary materials
Immediately replace machine parts which are not in perfect condition.
Exclusively use original Strautmann spare and wearing parts or parts approved by B. Strautmann &
Söhne GmbH u. Co. KG, such that the operating license according to national and international
regulations will remain unaffected. If spare and wearing parts produced by third-party manufacturers
are used, their stress-related and safety-conscious design and production will not be ensured.
B. Strautmann & Söhne GmbH u. Co. KG will not assume any liability for damage resulting from the
use of non-approved spare and wearing parts or auxiliary materials.