36
C L E A N I N G A N D M A I N T E N A N C E
E N
7.2
Maintenance
7.2.1
Weekly maintenance
Prior to maintenance:
Before maintaining the spindle, the spindle sealing
air must be activated:
▷
Briefly press service button [B].
The current tool is placed down and the spindle
returns to the service position. The spindle is
released; the motor is blocked.
▷
Open the door of the milling machine.
▷
Press service button [B] on the milling machine.
The sealing air is activated. The service button
lights up.
After the maintenance
When the maintenance is completed:
▷
Shut the door of the milling machine.
▷
Briefly push operation button [A].
The tool is picked up again. The spindle travels
back to the starting position or to the position,
where the program was interrupted.
Spindle
The provided spindle service set and a milling tool
of your choice are required for maintenance of
the spindle.
In order to clean the spindle:
▷
Remove any dust from the cap and the spindle
using a dry, soft cloth. Do not use cleaning
agents!
To remove the collet:
▷
Apply the spindle wrench to the collet.
Fig. 11
▷
Insert a milling tool into the open collet.
▷
Using the spindle wrench, unscrew the collet out
of the spindle.
Fig. 12
NOTE:
Danger of damaging the machine!
▷
Do not use compressed air, ultrasonic or a
steam jet for the cleaning!
1.
2.