background image

1

Installation and Service Manual

for SRC25, SRC252, SRC50, SRC502, SRC75, SRC752

Thank you for purchasing the Stratus SRC series rocking piston compressor. This instruc-

tion manual explains the product operations and gives important precautions regarding 

its safe use. Please read and follow these instructions to experience years of trouble free 

service on these top of the line units.
To avoid accident, do not use the compressor in any way other than as described in this 

instruction manual especially when you see “WARNING”. After reading this instruction 

manual, keep it nearby as a reference in case questions arise during use.
If this instruction manual should become lost or damaged, they are available on our 

website www.easypropondproducts.com.

PRODUCT USE CRITERIA AND PURPOSE

•  Pump only clean, dry air

•  Protect unit from dirt and moisture

•  Do not pump flammable or explosive gases or use in an atmosphere that contains 

such gases

•  Protect all surrounding items from exhaust air, this exhaust air can become very hot

•  Corrosive gases and particulate material will damage unit — water vapor, oil-based 

contaminants or other liquids must be filtered out

•  Product performance changes when using at high altitudes

•  This pump is oil-less and requires NO lubrication

SAFETY:

Your safety and the safety of others is extremely important. We have provided many 

important safety messages in this manual and on your compressor. Always read and 

obey all safety messages.

This is the safety alert symbol. This symbol alerts you to hazards that can kill or 

hurt you and others. The safety alert symbol and the words “Danger” and “Warn-

ing” will precede all safety messages. These words mean:
Danger - You will be killed or seriously injured if you don’t follow instructions.
Warning - You can be killed or seriously injured if you don’t follow instructions.
All safety messages will identify the hazard, tell you how to reduce the chance of 

injury and tell you what can happen if the safety instructions are not followed.

Rocking Piston Compressors

Please read this manual completely before installing and using this compressor. 

Save for future reference and keep in the vicinity of the compressor.

Содержание SRC25













Отзывы: