Stratford EcoBoiler, Руководство по эксплуатации и установке, Страница: 24 / 40

ADJUSTING THE DOOR HINGES
Once the stove has been fired for a period of time
the door may appear to have moved out of
alignment with relation to the door aperture or catch.
This is quite normal and due to the settling of the
casting.
The door can be re-aligned using the following
procedure:-

When the stove is cold, open the fire door so
that it is at a right angle to the stove front and
lift the door off its hinges.

Gently tap the hinges in the direction required
to compensate for the misalignment (Fig. 7)

Re-fit and check, repeat above procedure if
necessary
If the fire door needs to be raised use the following
procedure:-

Drop one washer (M6) on the top and bottom
hinge pins

Re-fit & check, repeat procedure if necessary
Fig. 7
NOTE:
There is no adjustment to the door lock, however
periodically check the tightness of the retaining
screw on the end of the door handle shaft
(See Fig. 8)
Fig. 8
Stratford EcoBoiler Stove 24
SERVICE & MAINTENANCE