CONTROL - FRONT PANEL:
1. Channel 1/5 – Channel 4/8
- These buttons perform the following functions:
a) Displays a picture in Full Screen. If you are in the Quad1 mode, select the
Channel 1/5 button and hold for 2-3 seconds to view Camera 1 in Full Screen.
To view other camera locations, press Ch 2/6, Ch 3/7, Ch 4/8 buttons.
b) Freezes a specific camera.
You have the option to freeze images in Full or Quad screen mode.
In Quad Screen
mode: press a channel button to freeze this channel in the
Quad screen; press again to unfreeze;
In Full Screen mode:
press the current channel being viewed to freeze it; press
again to unfreeze.
c) Scrolls LEFT / UP / DOWN / RIGHT in Menu mode.
In Menu mode
: These buttons are used to navigate through menu options. For
more information on Menu mode, please refer to page 8
.
d) Scrolls LEFT / UP / DOWN / RIGHT in Zoom mode.
For more information on Zoom mode, refer to page 6.
e) MOVE / ZOOM / FOCUS in Pan Tilt mode.
For more information on Pan Tilt, refer to page 10.
2. (Quad 1/2) / Enter -
This button serves 2 functions:
(a)
Quad 1/2-
Pressing this button goes to Quad viewing mode (2 quad viewing
screens)
(b)
Enter
– Confirms selection in the Menu mode
3. FRZ ALL / ALRS
- This button serves 2 functions:
a)
FRZ ALL (Freeze All)
– Pressing this button Freezes the screen being
viewed. Pressing this button in Quad mode will freeze all four cameras. An “F”
will appear in the On-Screen Display.
b)
ALRS
(
Alarm)
– During an Alarm, this button will turn off the alarm sound and
set the system to the previous setting.
4. Volume
– These two buttons turn the Volume Up / Down.
-5-
1 2 3 5 6 7 8 9
4
10 11 12 13
