CONNECTING A TRANSMITTER SIGNAL FROM YOUR VCR/
SATELLITE/DVD
INSTALLATION OF TRANSMITTER
1. Connect one end of the RCA cables to the Audio/Video Input jacks of the
Transmitter; the other end to the Audio/Video Out jacks of the
VCR/Satellite/DVD. Ensure that the yellow, red and white plugs match the
yellow, red and white jacks on both the VCR/Satellite/DVD and the
Transmitter.
2. Plug one end of the supplied power adapter (9V 500 mA adapter) into the
back of the transmitter; the other end into an electrical outlet. The system is
defaulted to channel 1.
Ensure the Power Switch on the Transmitter is turned OFF prior to
proceeding with the following steps.
NOTE
Rear of
VCR
RCA Cable (Supplied)
Back of Transmitter
Electrical
Outlet
STEP 1:
5
