SYSTEM OPERATION
MANUAL VIEWING OPTIONS
To manually view a specific transmitter press the Ch. Select key to view the
desired video source location. (Channel 1-4)
SELECTABLE DWELL SETTING
This system provides you with three selectable dwell options (2, 5 and 10
seconds) when the system is set to Auto Mode. This system is preset to 2
second selection.
Changing Dwell Mode
1.
Press and hold the CH Select button. The LED button will turn
on to indicate that it is set to 2 seconds.
2.
Continue to press and hold the CH Select button. The LED button
will flash at a one second interval to indicate that it is now set to
the 5 second setting.
3.
Continue to press and hold the CH Select button. The LED button
will flash three times to indicate it is set to the 10 second setting.
9
USING THE IR EXTENDER FEATURE WITH YOUR REMOTE CONTROL
The system not only allows you to send crisp audio/video from one area to
another, it also gives you the ability to control the source using your
existing remote control device. It converts the infrared (IR) signal emitted
by your remote control to a radio frequency (RF) signal in the UHF band at
the receiver and sends it back to the transmitter where the RF signal is
converted back to the original IR signal and beamed to the audio/video
device.
The following states the use of the remote control feature to control you’re
A/V equipment by using the existing remote control:
Simply connect the IR extender plug into the back of the transmitter
and position the IR Extender near the A/V source equipments front
panel.
CONNECTING MORE VIDEO DEVICES TO YOUR SYSTEM (MAX. OF 4)
The Video Sender system allows you to connect more than 1 receiver. You
have the option to connect multiple receivers to this system for viewing your
Satellite/DVD picture from multiple rooms.
