Stratco X-1 Steel Framing, Руководство по конструкции

Страница: 4 / 4

Specifications
Steel wall frames
• Stud, plate and noggin width ................................................................... 75mm
• Material .......................................................... 0.55/0.75mm BMT, G550 AZ150
• Maximum stud spacing .......................................................................... 600mm
• Connections .............................................................................. 5mm steel rivet
• Bracing ............................................................ 0.8mm x 30mm tensioned strap
Steel roof frames
• Truss chord height .................................................................................. 54mm
• Truss chord width .................................................................................... 78mm
• Web member width .................................................................................. 47mm
• Truss chord and web member material ............. 0.80/1.0mm BMT, G550 AZ150
• C-Section rafters height ........................................................................... 75mm
• C-Section rafters material ........................................... 0.95mm BMT, G550 Z350
• Maximum clear truss span .......................................................................... 15m
• Connections ................................................................. Steel self drilling screws
Easy Installation
Quick and easy to install, the Stratco X-1 Steel Framing System is ideally suited
to project, specialist and owner builders. By providing you with a complete set
of steel components your frames are installed following a step-by-step set of
assembly instructions.
By utilising many of the second fix features built into your Stratco X-1 frames you
will soon find second fixing to the X-1 Framing System both quick and easy. All this
is backed by Stratco’s commitment to the highest level of customer service.
Quality Design and Engineering
Stratco X-1 wall frames and roof trusses are manufactured from high tensile Zinc/
alum steel providing high strength and excellent corrosion protection. Due to the
extensive use of light-weight steel sections the X-1 Framing System is also very easy
to handle on site.
The Stratco X-1 Framing System has been designed in accordance with applicable
Australian Standards, AS/NZS 1170.0, .1 & .2, AS4055, AS4600, AS3600 and AS3623.
The engineering calculations have been assessed and certified by independent
structural engineers.
Maintenance
X-1 Steel Framing is produced from the highest quality materials and will provide
many years of service if the important recommendations set out in the Stratco
‘Selection, Use and Maintenance’ brochure are followed.
Stud, plate & noggin
75
35
Web member
25
47
Truss chord
15
54
48
C-Section
75
40
CONTACT
1300 165 165
www.stratco.com.au
All brands and logos/images accompanied by ® or ™ are
trade marks of Stratco (Australia) Pty Limited.
© Copyright February 06
BROCSX1