Stratco X-1 Steel Framing, Руководство по конструкции

Страница: 2 / 4

X
-
1 Wall Frames
Straight and true
Double ribbed 75mm zinc/alum high tensile
steel stud, plate and noggin provides superior
strength and rigidity.
Walls and ceilings are straight and true with no
twists and curves making linings, floor coverings
and carpentry simpler and quicker to install.
Recessed connections
Recessed locating indents and fixing holes
create a flush and uniform wall finish, ideal for
the installation of both internal and external
wall linings.
The unique textured stud profile provides a
strong keying surface for lining adhesives.
Special features
X-1 wall frames make home building easier...
• Rolled edge service holes for electrical and
plumbing remove the need to use grommets.
• The product is asymmetric which allows
studs to be ‘boxed’ (Fit inside one another).
• Stratco’s lock-in brick tie system eliminates
the use of fasteners.
• Light weight frames make handling and
installation easier.
X
-
1 Framing System
The X-1 Framing System is a complete steel
framing solution that has been designed and
engineered by Stratco to strict standards of
strength and quality.
With straight and true lines the Stratco X-1
Framing System can add an extensive range
of quality features to your next project, such
as raked or dropped ceilings, split level living
areas and complex roof profiles.
X-1 Steel frames …
• Are termite and borer resistant
• Remain straight and true
• Are easy to install
• Are strong and lightweight
• Do not absorb water
• Are not susceptible to dry rot
• Will not contribute to the fire load
• Are safe to handle
• Allow extended design freedom
• Are 100% recyclable
• Improve work site security