COmpOnEnTS
RIDGE KnUCKLE
Slots inside the gable rafters to form
connection at the ridge.
RAFTERS
Gable Rafters consist of pre-cut 120
Outback beam.
SpACERS
Used to prevent the 150 attachment
beam from crushing
RAFTER TO VALLEY BRACKET
This bracket fastens the rafter to the
valley beam.
SOAKER FLASHInG
Water proofs the rear of the gable and
conceals the existing house gutter.
BEAm CAppInG
Fixed to top of the valley beam to
provide support for outback deck.
22 OR 30 EnD STRUT pLATE
Secures the end strut at the ridge.
EnD STRUT
Consists of a section of post.
Supports the gable in-fill.
pAnEL STRIpS
Decorative strips fixed to
in-fill panels.
In-FILL pAnEL
Cut to suit gable end frames.
FInIAL
Provides decoration at the apex of
the gable end frame.
BEAm FILLER
Fills gap between intersecting Beams.
HEADER FLASHInGS
Run along header beam to neatly
finish the base of in-fill panels.
pOST CAp
Fills gap between post and beam.
pOST BRACKET
Connects post to beam.
BOLTS
Vary depending upon the connection,
ensure correct fixings are used.
GABLE BEAm BRACKET
Connects rafters to header beam
on an infill gable
BEAm TO BEAm BRACKET
Connects horizontal beams.
RIDGE RAFTER BRACKET
Connects ridge beam
to rafters on a gable.
HEADER BEAm BRACKET
Connects end strut to header beam on
an in-fill gable.
RIDGE CAp
This flashing covers the roof sheets at
the gable ridge.
SCREWS AnD RIVETS
Vary depending upon the connection,
ensure correct fixings are used.
BARGE CAp
The barge cap covers the area where
the deck finishes at portal frame.
14 x 95
12 x 20
10 x 16
Rivet
M10 Hex Head
M12 Hex Head
Cuphead
