background image

CONTACT

1300 165 165

www.stratco.com.au

All brands and logos/images accompanied by ® or ™ are 
trade marks of Stratco (Australia) Pty Limited.

© Copyright November 2010

  

   

Additional Information

Up  to  date  information  about  Stratco  products,  spans,  installation  requirements 

and  technical  advice  can  be  found  on  our  website  at:  www.stratco.com.au.  It  is 
advisable to obtain current information prior to ordering any materials. 

Further  details  about  complying  with  legislation  can  be  found  in  the  Stratco 

‘Selection, Use and Maintenance’ brochure. 

The  NSW  Office  of  Fair  Trading  website  also  provides  information  on  complying 

with  legislation:  http://www.fairtrading.nsw.gov.au/Tenants_and_home_owners/
Home_building_and_renovating/The_building_process/Residential_gutters.html. 
If additional information is required contact the Stratco office in your state.

Maintenance

Regular  maintenance  is  essential  to  maintain  the  good  looks  of  all  Stratco  steel 

products and to ensure you receive the maximum life-span possible in your area. 
Gutters must be regularly cleaned to prevent the build up of leaf debris, fungus 
or any other material that could prevent the free drainage of water from the roof. 

Washing with clean water must be frequent enough to prevent the accumulation 

of  dust,  salts,  and  pollutants  or  any  other  material  that  will  reduce  the  life  of 

the product. Stratco steel products that are regularly washed by rain require no 
additional maintenance. No Stratco steel structure or materials are recommended 
for use over, or in close proximity, to swimming pools or spas. No material that 
retains water (such as dirt or paving sand) should be placed against the columns. 
Care must be taken when determining the location of Stratco steel products so that 
they  are  not  placed  in  close  contact  with  sources  of  pollution  or  environmental 
factors  that  could  affect  the  life  of  the  steel.  Refer  to  the  ‘Selection,  Use  and 
Maintenance’ brochure for more information.

Figure 6

Содержание High Fronted Gutters








Отзывы: