Installation Order of Screen Top Components
Self-drilling screws
Top track
Lattice clips
Plastic lattice
Lattice track
Superdek or
CGI track
Lattice track
Self- drilling
screw
Lattice
clip
Slide lattice clips
inside track
Fasten post
extension in
position, using
one 10x16 self
drilling screw on
each side.
Fix one 10x16mm
self drilling screw
to post extensions
at mid-height,
offsetting 5mm
from centre.
Post Extension
Bracket
Post Extension
Remove screws
Top Track
Post
Post Extension
Bracket
Replace screws
Post Extension
Post
Lattice
Post Extension
Bracket
Fasten post
extension in
position, using
one 10x16 self
drilling screw on
each side.
Fix one 10x16mm
self drilling screw
to post extensions
at mid-height,
offsetting 5mm
from centre.
Post Extension
Bracket
Post Extension
Remove screws
Top Track
Post
Post Extension
Bracket
Replace screws
Post Extension
Post
Lattice
Post Extension
Bracket
Installation Order of Screen Top Components
Self-drilling screws
Top track
Lattice clips
Plastic lattice
Lattice track
Superdek or
CGI track
Lattice track
Self- drilling
screw
Lattice
clip
Slide lattice clips
inside track
Installation Order of Screen Top Components
Self-drilling screws
Top track
Lattice clips
Plastic lattice
Lattice track
Superdek or
CGI track
Lattice track
Self- drilling
screw
Lattice
clip
Slide lattice clips
inside track
Fasten post
extension in
position, using
one 10x16 self
drilling screw on
each side.
Fix one 10x16mm
self drilling screw
to post extensions
at mid-height,
offsetting 5mm
from centre.
Post Extension
Bracket
Post Extension
Remove screws
Top Track
Post
Post Extension
Bracket
Replace screws
Post Extension
Post
Lattice
Post Extension
Bracket
Fasten post
extension in
position, using
one 10x16 self
drilling screw on
each side.
Fix one 10x16mm
self drilling screw
to post extensions
at mid-height,
offsetting 5mm
from centre.
Post Extension
Bracket
Post Extension
Remove screws
Top Track
Post
Post Extension
Bracket
Replace screws
Post Extension
Post
Lattice
Post Extension
Bracket
Install the posts, tracks and sheets as detailed in the previous
section. Once the posts, tracks and fence sheets are in place, the
screen top components are ready to be installed.
Install the lattice track first. Place the lattice track on top of the
existing Good Neighbour track and position it in the middle of
the highest point of the track. Fix the lattice track using two self-
drilling screws at even spacings.
With the lattice track is in position, the plastic lattice can now be
inserted into the lattice track.
The top track must now be installed. First, slide four lattice clips
into the top track, spacing them evenly. Push the top track onto
the lattice until the lattice fits snugly between the clips. Fix the
track to the posts using self-drilling screws, fasten on each side
at both ends as per the standard track.
This section covers the installation of a new screen top extension
to an existing Stratco Good Neighbour fence.
On one corner of the existing fence panel, where the post is
fastened to the top track, remove the two 10x16mm screws.
Slide the Good Neighbour post extension bracket down, between
the outside of the top track and the inside of the post.
Once the post extension bracket is in position, replace the
10x16mm self drilling screws into their existing holes, fastening
the post extension bracket to the top track.
Slide the post extension over the post extension bracket. Fasten
the post extension to the post extension bracket using one
10x16mm self drilling screw on each side.
Repeat the previous steps for all other post extensions along the
fence line. To install the Good Neighbour screen top componentry,
refer to the previous section.
Figure 8.3
Figure 8.2
Figure 7.0
Figure 7.2
Figure 7.1
Figure 8.0
Figure 8.1
SCREEN TOP EXTENSION
SCREEN TOP INSTALLATION
