Installation Area
The installation area should be free of sources of vibration and electromagnetic interference that could
affect the proper functioning of the printer.
The floor gradient should be less than 0.5% (5 mm per meter).
The floor should be stable and able to bear the load of the printer.
The area around the printer should remain dry at all times.
Shelves and cabinets are recommended near the printer for convenient storage of tools, parts,
accessories, manuals, and materials.
Floor Plan (Printer Area)
The following is a sample floor plan, showing the 3D printing system. The dimensions shown in the
figure are the minimum clearance requirements.
Figure 4 Printer floor plan (sample, not to scale)
Make sure that the printer is on the same level as the area surrounding it.
If the printer is positioned above or below the area surrounding it, it might not be possible to attach the
unloading cart.
Objet1000 Plus
Installation Area
10