Stratasys J750/J735/J720 User Guide
4 Operating and Maintaining the Printer
DOC-08040 Rev. R
4-121
Test List
Test Name
This column lists all of the tests, together with selection check boxes.
Click the check boxes to select the tests you want to run. To remove a selection,
click the check box again. To quickly select all of the tests in a component
category, use the
Group
drop-down list at the bottom of the screen.
Group
This column shows the component categories for each test.
This tells you which tests are run when selecting a category from the
Group
drop-
down list at the bottom of the screen.
Status
This column shows the results of each test after you run it:
Test successfully completed.
Test failed. (Double-click on a failed test’s line to review the failure details.)
Unknown results. (The test has not been run yet.)
Test Selection Area
In the
Test Selection
area, at the bottom of the screen, you can quickly select or
de-select tests by their characteristics:
All
Click to select all of the tests in the list.
None
Click to de-select all of the tests in the list.
Unknown
Click to select all test that have not been run yet (Status = ?).
Group
Use this menu to select tests by component category.
Selection Set
Use this menu to select a pre-configured set of tests to run at
specified times (computer startup, before printing, etc.).
Running Built-in Tests
To run the selected tests:
➢
Click
.
After you run a test, the
Save
and
View
command buttons are added to the
Built In Tests
screen.