strapex STR 64, Руководство по эксплуатации

Страница: 12 / 47

12
12.11
Strapex STR 64
1
TECHNICAL DATA
Weight 3.2 kg (7 lbs)
Dimensions Length 302 mm (17.75“)
Width 130 mm (5“)
Height 180 mm (7“)
Tension force Up to approx. 3000 N
Tension speed 75 mm/s (3“/s)
Air pressure Maximum 6 bar static
Air consumption
– Tensioning 4 Nl/s
– Sealing 3.4 Nl
Air connection G
1
/
4
“ (
1
/
4
“ NPT)
Sealing Sealjoint with 1 notch
Seal efficiency approx. 63% of strap tensile
strength
Emission sound pressure
levels, measurement
type A (EN ISO 11202) L
pA
83 dB (A)
Vibrations at handle
(EN ISO 8662-1) a
h,w
< 2,5 ms
-2
STEEL STRAP
Strap width 13, 16, 19 mm
(
1
/
2
“,
5
/
8
“,
3
/
4
“)
Normal quality:
Strap thickness 0.40–0.63 mm (.015“–.024“)
Tensile strength Up to approx. 850 N/mm
2
(117‘000 lbs/in
2
)
High strength
quality:
Strap thickness 0.40–0.63 mm (.015“–.024“)
Tensile strength Up to approx. 1100 N/mm
2
(156‘000 lbs/in
2
)
SEALS
Strap width 13 mm Part no. 480.013.022
Strap width 16 mm Part no. 480.016.022
Strap width 19 mm Part no. 480.019.022
DECLARATION OF AGREEMENT
We take sole responsibility for declaring that the
tool STR 64, to which this declaration refers,
is in full compliance with the current requirements
of the guidelines laid down by the council on
17th May 2006 (2006/42/EEC) “Machine Guide-
lines“.
According to norm:
EN ISO 12100-1, EN ISO 12100-2, EN 349,
EN 983, EN 792-2, EN ISO 14121-1,
EN 61000-6-2, EN 61000-6-3, EN 415-8
CH-8953 Dietikon, 18.12.2009
General Manager Manager Products
Technology: Packaging Technology:
U. Schweizer M. Binder
Agent for the publication of technical documentation:
ORGAPACK GmbH, Silbernstr. 14, CH-8953 Dietikon
TABLE OF CONTENTS
Page
1 Technical data 12
2 General information 13
2.1 Information on environmental protection 13
3 Safety instructions 14
4 Description 15
4.1 Design 15
4.2 Function 15
5 Initial operation 16
5.1 Suspending the tool 16
5.2 Compressed-air connection 16
6 Operating instructions 17
6.1 Operating the tool 17
6.2 Checking the seal 18
7 Preventive and corrective maintenance 19
7.1 Adjusting tensioning force/tensioning speed 19
7.2 Setting clearance between tension wheel and
tension plug
19
7.3 Replacing tension wheel 19
7.4 Replacing cutting knife 20
7.5 Replacing jaws and notcher 20
7.6 Cleaning the tool 20
8 Recommended spare parts 39
8.1 Parts list 39
Exploded drawing 45
9 Parts list compressed air motor 46
Explosion drawing 47