Stramatel 352 Series, Руководство по ремонту

Страница: 23 / 28

23/28
REPLACEMENT OF A LCD IN THE CONTROL CONSOLE
Unscrew the screw (A), take gently the battery pack out, und unplug its connector.
Unscrew the 3 small screws (C), and the 3 big screws (B), then take the back of the control
console out.
Unscrew the 2 nuts M3 (D), and the 2 small screws (E,G), and disconnect the flat cable (F).
Gently lift off the PCB X3324-X.
Unscrew the 2 nuts M3 (I), and the 2 nuts M3 (H), then replace the LCD.
Screw the nuts back, fit the PCB back into place, and screw the nuts (D) and the small screws
(E) (do not forget the flat cable (G)), and reconnect the flat cable (F).
Close the control console (make sure you don't screw the big screws (B) in place of the small
ones (C)).
Plug in the battery pack, place it in its spot, and screw back the trap door.
Test the control console.
Please send the faulty LCD to STRAMATEL for analysis.
Work time : 30 minutes
6
V
7
5
0
m
A
h
A
B
C
1
1 13
D
F
X3324-X
G
E
LCD
I
H