Stramatel 352 Series, Руководство по ремонту

Страница: 21 / 28

21/28
REPLACEMENT OF THE PCB IN THE CONTROL CONSOLE
Replacement of the PCB X3324-X:
Unscrew the screw (A), take gently the battery pack out and unplug its connector.
Unscrew the 3 small screws (C), and the 3 big screws (B), then take the back of the control
console out.
Unscrew the 2 nuts M3 (D), and the 2 small screws (E, G), and disconnect the flat cable (F).
Gently lift off the PCB X3324-X, and fit the new one into place.
Screw the nuts (D), and the small screws (E) (do not forget the flat cable), reconnect the flat
cable (F).
Close the control console (make sure you don't screw the big screws (B) in place of the small
Ones (C)).
Plug in the battery pack, place it in its spot, and screw back the trap door.
Return the faulty PCB to STRAMATEL for analysis.
Work time : 30 minutes
6
V
7
5
0
m
A
h
A
B
C
1
1 13
D
F
X3324-X
G
E