Stow SFG10E Скачать руководство пользователя | Manualshive

Страница: 11 / 62

background image

SFG10E ELECTRIC SURFACE GRINDER — OPERATION AND PARTS MANUAL — REV. #1 (07/16/07) — PAGE 11

MAINTENANCE, REPAIR AND STORAGE

1)

Use only genuine, approved replacement parts and
accessories for maintenance and repair. Use of parts
and accessories manufactured by others can result
in property damage and/or personal injury.

2)

Follow the

Service

instructions as outlined in the

appropriate section of this manual.

3)

Always stop the electric motor and disconnect the
power source cable BEFORE checking or working on
the SURFACE GRINDER.

4)

Always properly maintain the SURFACE GRINDER.
Frequently check all fasteners and individual parts.
Built in safety features are effective only if they are
maintained in good working condition. Replace any
questionable part or assembly with a genuine, factory
approved, replacement part. Do not forsake proper
maintenance for the price of a few replacement parts.
Proper maintenance does not cost...it actually pays
dividends. Do not attempt any maintenance repair work
not described in this manual. Have such work
performed at your dealer’s service facility.

5)

Do not operate the SURFACE GRINDER without the
use of factory approved V-belt and diamond blade
guards that are maintained in proper structural
condition. Frequently inspect the guards for signs of
wear, cracks and other signs of fatigue. If there is
any question regarding the structural integrity and/or
condition of the belt guard, properly dispose and
replace with a genuine, factory approved, replacement
part only.

6)

Maintain all safety and operation decals in proper
condition. If any decal becomes damaged and/or
unreadable, replace with a genuine, factory approved,
replacement part only.

7)

The SURFACE GRINDER utilizes many self-locking
type hexagon head nuts to minimize the effects of
vibration. Replace all self-locking hardware with
genuine, factory approved, replacement parts only.

8)

Consult the material supplied by the electric motor
manufacturer for specific information relative to proper
operational, lubrication and storage requirements.

SAFETY PRECAUTIONS

«
...
9
10
11
12
13
...
»

Содержание SFG10E































































Отзывы:

Нет отзывов

Похожие инструкции для SFG10E

Бренд: Makita Страницы: 11

Бренд: Makita Страницы: 8

Бренд: Makita Страницы: 3

Бренд: Makita Страницы: 3

Бренд: La Marzocco Страницы: 74

Бренд: La San Marco Страницы: 74

Бренд: T.O.M Страницы: 24

Бренд: Black+Decker Страницы: 68

Бренд: Freihafen Страницы: 6

Бренд: Scarlett Страницы: 20

WBA 11-125 Quick

Бренд: Metabo Страницы: 28

Бренд: BTI Страницы: 174

Бренд: Ideen Welt Страницы: 27

Бренд: Grizzly Страницы: 2

Бренд: SaMASZ Страницы: 24

Бренд: Ryobi Страницы: 14

Бренд: Kitchener Страницы: 8

Бренд: Chicago Electric Страницы: 20

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды