EN
Installation instructions
Electrical Connection
We advise that this appliance is connected so
the it is easily accessible after installation.
If the warming drawer is to be installed on a
permanent basis
a qualified technician should
install it. In such a case, the appliance should be
connected to a circuit with an all-pole circuit
breaker with a minimum separation of 3 mm
between contacts.
The data necessary for the electrical connection
are
described on the warming drawer’s data
badge
and these must be compatible with those
of the power outlet you are going to use.
WARNING: THE WARMING DRAWER MUST
BE CONNECTED TO EARTH.
The manufacturer and retailers do not accept
responsibility
for any damage that may be
caused to people, animals or property if these
installation instructions are not observed.
Technical Data
S7 – E145WD
S7 – E290WD
Total wattage
420W 520W
Amps
3A 3A
Electrical
supply
220 – 240V ~
50Hz
220 – 240V ~
50Hz
Содержание Accolade S7 - E145WD
Страница 1: ...EN ...
Страница 14: ...14 EN Installation Combination possibilities S7 E145WD S7 E290WD ...
Страница 17: ...3 EN 08 26384 00 July 2007 Warming Drawer ...