STOVES 600CGH, Руководство пользователя

Страница: 6 / 232

on which the hood is to be fixed.
Fig.3 Fig.4
• Fixing the decorative telescopic flue:
Arrange the electrical power supply within the dimensions of the decorative flue. If your appliance is to be
installed in the ducting version or in the version with external motor, prepare the air exhaust opening. Adjust
the width of the support bracket of the upper flue (Fig.4). Then fix it to the ceiling using the screws A (Fig.4) in
such a way that it is in line with your hood and respecting the distance from the ceiling indicated in Fig.2.
Connect the flange C to the air exhaust hole using a connection pipe (Fig.5). Insert the upper flue into the
lower flue and rest above the frame. Extract the upper flue up to the bracket and fix it with the screws B
(Fig.4). To transform the hood from a ducting version into a filtering version, ask your dealer for the charcoal
filters and follow the installation instructions.
Fig.5 Fig.6
• Filtering version:
Install the hood and the two flues as described in the paragraph for installation of the hood in ducting version.
To assemble the filtering flue refer to the instructions contained in the kit. If the kit is not provided, order it
from your dealer as accessory. The filters must be applied to the suction unit positioned inside the hood. They
must be centred by turning them 90 degrees until the stop catch is tripped (Fig.6).
EN-5