Figure 2:
Slider controls.
Using the hood
To switch on the hood, slide the speed
control to select:
low
,
medium
, or
high
speed.
The neon indicator light will light up to
show when the fan is operating.
We recommend that you switch on
the hood for a few minutes before
you start cooking, and then leave it
running for approximately 15 minutes
afterwards to ensure that all odours
are extracted.
To switch off
, return the slider control
to the “off” position.
To switch on the hood lamps
To illuminate the cooking area under-
neath the hood, slide the light control
to the “on” position.
To switch off,
return the control to the
“off” position.
Important safety notes
•
Keep hob rings covered with pans
when switched on to avoid
damaging the hood. The use of
an unprotected flame can cause a
fire hazard.
•
Do not
flambé food underneath
the hood.
•
When frying foods, take care to
avoid cooking oil flares.
•
Wash the grease filters regularly -
refer to the cleaning section.
•
Do not
check filters while the hood
is in use.
•
Do not
touch the lamps after
prolonged use of the appliance.
Re-circulation method only:
•
Keep the air ducting vents clear of
obstruction.
•
Change the carbon filters every 4
months.
4
light switch
speed control
neon
off on
off
low
medium
high
Using the Hood
08 27123 01- 1100TRC hood 17/5/05 4:14 pm Page 6
