Stove Guard Guardian COOKTOP Скачать руководство пользователя страница 1

Page 1 of 10

INSTALLATION & OPERATING MANUAL

Please Keep This Manual for Future Reference

Guardian COOKTOP Model

Thank you for your purchase.

STOVE GUARD

is an electronic safety device for use with electric stoves. It turns the stove

OFF when you forget by using the advanced technology found in security monitoring devices and a specially
programmed micro controller.

STOVE GUARD

controls the stove's electrical system to help prevent food and pots from burning, as well as reducing the

risk of fire caused by unattended cooking.

STOVE GUARD

is preset at the factory at the highest fire safety setting.

This is the recommended setting for use by anyone with Alzheimer’s or similar medical condition.



When properly installed, adjusted, and set in

AUTO

mode,

STOVE GUARD

will automatically shut the

electric stove OFF if no one is present in the monitored cooking area for a preset period of time.



Upon returning to the cooking area,

STOVE GUARD

will detect their presence and automatically turn the

stove ON again. The preset time will reset to the last setting.



STOVE GUARD

also can be used in a

TIMER

mode to set a maximum cooking time, after which the

stove will be automatically turned OFF.

IMPORTANT WARNING

Installation of the

STOVE GUARD

COOKTOP Model

requires a licensed Electrician

to be wired properly according to

local electrical codes.

Do not disassemble any of the components. There are no user serviceable parts inside. Refer servicing to a qualified person
only.

IMPORTANT TECHNICAL SAFEGUARDS

DO NOT INSTALL

the EMU (Electronic Monitoring Unit):

Directly above a heat source or where hot/cold air or steam will blow onto it.
On or above a microwave or toaster oven,
directly, on or above the stove.

Do not allow grease to build up on the sensing unit. This will reduce STOVE GUARD's sensing range and possibly turn the
stove OFF even when someone is at the stove.
Clean the outer surface of the EMU with a clean, damp cloth only. Do not use soaps or cleaning liquids.

STOVE GUARD must be tested with the individual who requires this device and adjusted to their personal needs, as
well as adjusted to the home environment of use to ensure proper functioning. Additional fire safety devices; such as
smokedetectors & fire extinguishers must also be used to ensure complete cooking fire safety.

Содержание Guardian COOKTOP











Отзывы: