Stout Designs TB-001, Руководство по эксплуатации

Страница: 7 / 39

! WARNING !
The machine is designed for trimming horizontally orientated overhanging branches 2” in
diameter or less along forestry trails, pathways and roads and is to be used only when area is
clear of bystanders, fellow workers or animals.
The only accessories you can operate with this equipment are ones provided by Stout Designs,
LLC and specifically designed for your exact unit.
Never use the machine if you are tired, if you have drunk alcohol, or if you are taking medication
that could affect your vision, your judgement or your co-ordination.
Shut down equipment engine prior to exiting the vehicle and visually ensure the blades have
stopped completely.
Ideal operating speed for the saw is 3200-3600 RPM. Although the saw will run at a higher
RPM the motor is designed to operate at a maximum RPM of 3600 and actually produces the
most torque between 3200-3600 RPM. Blades will begin to rotate at an RPM greater than 2000
RPM.
Wear personal protective equipment. See instructions under the “Personal protective equipment”
heading.
Never use a machine that has been modified in any way from its original specification.
Never use a machine that is faulty. Carry out the checks, maintenance and service instructions
described in this manual. Some maintenance and service measures must be carried out by trained
and qualified specialists. See instructions under the Maintenance heading.
All covers, guards and handles must be fitted before starting. Ensure that the spark plug cap and
ignition lead are undamaged to avoid the risk of electric shock.
The machine operator must ensure that no people or animals come closer than 20 feet while
working. When several operators are working in the same area the safety distance should be at
least 50 feet.
Carry out an overall inspection of the machine before use. See the maintenance schedule. In
addition to this manual, a Service manual from the MOTOR manufacturer will be provided.