Preparation
Instructions for use • C-MAC Monitor • NDQ566_EN_V1.0_02-2021_IFU_CE-MDR
17
5 Preparation
5.1 Unpacking the product
1.
Carefully remove the product and accessories from the packaging.
2.
Check the delivery for missing items and evidence of shipping damage.
3.
In the case of damage, hidden defects, and short deliveries, document their nature and
extent and contact the manufacturer or supplier immediately.
4.
Keep packaging for further transport.
5.2 Assembling the product
Attaching the monitor to the stand
To attach the monitor to a stand, use VESA 75 Quick Clip stand holder 8401YCA and,
optionally, clamp 8401YB (see section Accessories [p. 37]).
1.
Attach the stand holder to the back of the monitor using 4 screws.
2.
Press together the holder and slide the holding arm through the holder.
3.
Release the holder in the desired position.
ð
The monitor is secured in place on the holding arm.
5.3 Connecting the power supply
The C-MAC Monitor can be powered using the power supply unit or the integrated lithium-ion
battery.
1.
Before use, ensure that the power supply to the monitor for the intended intervention is
provided either by the battery or by a mains connection.
2.
If power is supplied by the battery, check the battery charge state on the status bar (see
Monitor status bar [p. 22]) and charge the battery if necessary.
Battery charging and usage time
The battery can be used for approx. 2 hours when fully charged.
Recharge the battery:
–
After each use of the device
–
Whenever the charge state falls below 50 %
The discharged battery is fully charged after approx. 5 hours when the device is switched off.
