Storm UNIQUE 2.1, Руководство по эксплуатации

Страница: 17 / 21

16
5.5 Wiring of the sockets
5pin XLR (DMX) :
Pin 1 = Ground, Pin 2 = DMX –, Pin 3 = DMX +
3pin XLR (analog) :
Pin 1 = Ground, Pin 2 = 0-10 V + DC in, Pin 3 = 12 V + DC out, max. 50 mA
5.4.5.1 Auto start
If the timer is in operation and you disconnect the machine from the mains cable, the
Unique 2.1 will re-start in the Timer-Mode as soon as it‘s reconnected to the mains. To
‰Š †Š~‰†ˆ{‰‰Š~{c z{Cx‹ŠŠ „qGJs| ˆƒ ˆ{Š~w„Hi{y „z‰ ˆx‰Šy~„}Š «[iYž
in the Timer-Mode and then press the Enter-button.
5. Operating the Unique 2.1
With the internal timer, the haze time and wait time can be adjusted in Minutes
(0.1 - 99), the pump and fan output can be adjusted in per cent (0 - 99).
To start the Timer-Mode, press and hold the Mode button [16] for more than 2 Se-
conds. The red Timer/Profile-LED [19] will blink as soon as the machine has switched
to the Timer-Mode. As long as the timer is in operation, the red Timer/Profile-LED
blinks.
The adjusting of the output, haze time or wait time is the same as in the Standard-
Menu. This means you have to press the Mode button repeatedly until you reach the
required function.
With the Up/Down buttons you can adjust the required functions, then press the
Enter button to start the timer. Please note that P and F control Pump and Fan, whereas
P. and F. control Pause time and Haze (Fog) time (Figs. 10 - 13).
The timer cycle starts with the time shown on the display when you press the Enter
button (i. e. P.xx = Starts with wait time, F.xx = Starts with haze time). The timer cycle
will not start if you press the Enter button while the pump or fan output setting is
shown on the display.
o ‹yw„‰Šy~xwyŠ Š~{iŠw„zwˆzCc{„‹x†ˆ{‰‰„}Š~{c z{x‹ŠŠ „qGJs| ˆ
ƒ ˆ{Š~w„Hi{y „z‰ ˆx†ˆ{‰‰„}Š~{c z{x‹ŠŠ „ˆ{†{wŠ{z‚‹„Š‚«[iYž‰~ ‰ „
the display and then press the Enter button once.