15. Heart Rate Monitoring
To monitor your
heart rate
, wear the watch tightly to your wrist to ensure an accurate reading.
1. Press the button on the side of your watch to enter
Heart Rate Monitoring Mode
.
2. Long-press the button for 3 seconds to start the test. Press the watch against your wrist tightly to ensure accurate
reading.
3. The test will last for around 15 seconds. While measuring your heart rate the watch will show this icon
.
After 20 seconds, the watch will vibrate lightly and display your heart rate.
If the watch cannot pick up your heart rate accurately it will show the high or low icon as follows:
Heart Rate monitor is not for medical use, this feature is just for reference and does not guarantee an accurate reading.
Please do not use in place of medical guidance/equipment.
16. Blood Pressure Monitoring
1. To test your
blood pressure
, press the watch firmly to your wrist. Press the button on the side of the watch to show
the blood pressure screen. (The LED screen should show 2 numbers and mmHG alongside)
2. Hold the button for 3 seconds to start the test.
3.The test will last for around 15 seconds, and will vibrate when the reading has been taken.
Blood Pressure monitor is not for medical use, this feature is just for reference and does not guarantee an accurate reading.
Please do not use in place of medical guidance/equipment.
17. Battery
You can check the remaining
battery
of your watch on the homepage of your
Leclock app
. This can be found in the
centre at the top of the app.
To keep optimal usage, when the battery reaches 30%, the watch will close smart functions automatically and the
battery will only work for the running of the watch.
Page 11 – Page 13
