Stork 900219.005, Руководство пользователя

Страница: 3 / 14

SOFTWARE .07
Adjustment options
Key UP
Pressing this key you can increase the parameter or parameter value or scroll the
parameter list.
Key DOWN
Pressing this key you can decrease the parameter or parameter value or scroll the
parameter list.
Key SET TIME
By pressing this key a specific value is indicated and can be adjusted in conjunction with
the UP and DOWN key. Like this the actual time of day can be adjusted. When in
programming cycle the switching times are adjusted this way.
Within the programming cycle the time settings of the previous day can be copied to the
selected day by additionally pressing the PROG key. While doing so the SET TIME key is
to be pressed first, and than the PROG key in addition.
Key PROG
If this key is pressed for 3 seconds the programming cycle of the switching times is
accessed, always starting with parameter “H0”. Within the programming cycle the time
settings of the previous day can be copied to the selected day by additionally pressing the
SET TIME key. While doing so the SET TIME key is to be pressed first, and than the
PROG key in addition. The display shows “CPY”.
Key “All On”
With this key the switching circle can be activated independently of the programmed
switching times. The display indicates this condition with LED3. By pressing this key
again, the switching times are reactivated.
After mains off the controller returns to the same condition as before.
Key Standby
Pressing this key switches off or on the controller. In standby mode, all exits are switched
off, the LEDs are off and the display shows “AUS”.
The key can be deactivated.