Störk-Tronic ST710-PWHVM.26, Руководство пользователя

Страница: 23 / 25

Connection to data logger
General note
The following listed measuring values as well as the inputs and outputs are available for the data
logger TRL1 via LON interface. In general the setpoints and parameters all are accessible.
Data logger protocol
Parameter values (read/write)
Adjustable parameters P1,P2,P3,P4,P5,P11,P12,P13,P14,P15,P16,P17,P18,P19,P21,
P30,P31,P32,P33,P34,P35,P36,P37,P38,P39,P40,P41,P42,P43,P44,
A1,A2,A3,A4,A5,A6,A10,A11,A12,A13,A14,A15,A16,A17,A18,A20,A21,
A22,A23,A24,A25,A30,A31,A32,A33,A34,A35,A36,A37,A38,A39,
A40,A41,A42,A43,A44,A45,A51,A52,A53,A54,A55,A56,A59,L0,L1
Adjustable setpoints S1, S11 (=S1')
Actual values (only read) Memory
address
Actual value temperature A1 0
Actual value pressure A2 1
Actual value power A3 2
Controller status
(only read) D1
Bit 0: Standby-Mode ("1", if "On")
Bit 1: Input E1
Bit 2:
Bit 3:
Bit 4:
Bit 5:
Bit 6: Output K1
Bit 7: Output K2
Bit 8: Output K3
Bit 9: Output K4
Bit 10: Output K5
Bit 11: Output K6
Bit 12:
Bit 13:
Bit 14:
Bit 15: Alarm (=K7) active 3
Status (adjustable)
Controller status Bit 0: Standby-Mode ("1", if "On") 0