© STOREX 2005 Mobi-MP4 XF50 9/28
6.
BASIC OPERATION
Power On
Press the [Power On] button to set the device to stand-by
mode.
Stand-by mode
Power Off
To switch the device off, press the [Power On] button for
3 seconds.
Battery charging
Connect the charger to a power source, and to the Mobi-
MP4 XF50 charge connector. The Mobi-MP4 XF50
switches to charging state and the indicator light turns
red. Typically, a full charge requires 5 hours. We
recommend to power the device off for charging.
Note: Charging is possible in power on and power off
states. The red indicator light flashes during
charge and comes off when charging is completed.
You can then disconnect the charger and use the
player.
© STOREX 2005 Mobi-MP4 XF50 10/28
7.
DETAILED OPERATION
Connection to the PC
Apply power to the Mobi-MP4 XF50 player. Connect the
large plug of the USB cable to the PC USB connector, and
the small plug of the USB cable to the Mobi-MP4 XF50
USB connector. The Mobi-MP4 XF50 screen should
display the connection picture. On the PC, click on
[My Computer]. Two removable disks should be
displayed: the first disk corresponds to the flash memory
disk, and the second corresponds to the SD/MMC card
memory. This disk is unavailable if the SD/MMC card is
not installed.
Detailed operation
I.
Video operation
1.
Press the [Power On] button for some seconds
to open the MP3/MP4 player, and wait for the
player to display the stand-by interface.
2.
Press the |
WW
/
XX
| button to select the Video
Play function, and press [MENU] to confirm.
3.
When the user interface is displayed, press the
|
WW
/
XX
| button to select the desired video
contents, and press the [PLAY] button to
confirm the selection.
4.
Press the [MENU] button to display the setting
interface. Press the [+/–] button to select the
