STOREX AIVX-372HD Quick Start Guide Page 6/28
DISPLAY SETUP
The TV input and AivX-372HD output must match to get a TV display.
If you are using HDMI connection, make sure to select HDMI input on your TV. Some TV
have two HDMI connectors, HDMI-1 and HDMI-2, select the correct HDMI-1 or -2 input on
your TV.
If you are using Composite video / SCART connector, make sure to select the corresponding
input on your TV.
Normally AivX-372HD will detect automatically the correct HDMI / SCART connection;
however, you can use the “VIDEO OUT” key of the remote control to toggle between the
two. Press this key several times until you get a TV display similar to this one :
Note:
When you cycle through the “Output” Key, the AivX-372HD will tell you which
mode you are at. Below is an example of cycling to “HDMI” mode. Please press “OK”
if this HDMI mode is what you want to select. It will switch back to the previous mode
automatically if idle for 15 seconds.
